In this current world where speed has turned out to
be everyone’s desire, fiber optic networks have turned out to be a
treasured object for the humanity. The incredible speed &
preciseness in data transmit these networks offer has made then
incredibly renowned for applications that need high-volume data transfer
at high speed. Indeed, it has reached an excellence of its own with
virtually no competition.
Where are such
fibers used? These are used in a number of contexts where the following
characteristics of communication are desired.
•
High speed of transmission - the data transfers employing optical rather
than electrical medium and as a result it travels practically at the
velocity of light.
• Low shrinking - this enables the data to transmit a high distance without any amplification concerned in the route.
•
High accuracy - this is possible only if low interference levels are
allowed from external signals, which would prevent any distortion in the
data being transferred.
Clearly, employing Fiber optic cable
as communication medium improves the process by a significant amount.
However, in reality, one can never hope to perform all the
communications required using a single piece of wire. That is where a fiber optic patch cord
becomes precious - it plays a crucial role in connecting cables. When
the signal goes from one fiber cable to another, it’s essential to
ensure that the signal is not distorted, lots or attenuated. The patch
cables & patch cords are the right choices to make to make the
connection.
What are the necessary characteristics
to look for when you go for your own fiber optic patch? There are quite
a few important features that ought to play at the back of your mind
while making your selection. Some important ones are listed here.
•
Modes: You’d wish to consider the modes of transmission. Both multimode
& single mode transmission patches are accessible and you would
have to recognize your requirements before you select the correct mode
for you.
• Aperture: Not all optical fiber cables
are of the same aperture. You would want to know the aperture of the
cables that you want your patch to fit into, before you select the
patch. Remember that many of the modern components tend to use narrower
aperture rather than the conventional wide ones.
•
Bandwidth & transmission rate: If specified, take a look at the
bandwidth and transmission rate that the fiber optic patch supports.
Also make sure that the patch can support the transmission of your data
signal to longer distances and suffer lower levels of loss.
•
Protocol support: Look at the protocols that the cables support. Some
important protocols would be the ATM protocol, Infiniband, Ethernet and
Internet Protocol.
No comments:
Post a Comment